Showing posts with label Herringbone Jacket. Show all posts
Showing posts with label Herringbone Jacket. Show all posts

Thursday, February 23, 2012

Fun w/Hair Canvas

Hair Canvas is one of my favorite sewing notions, it is also one of the most expensive items I use when the price per width is taken into account. It's cost does make me very circumspect when deciding what projects to use it with. It creates the most beautiful rolls on hems, lapels, arm scythes, necklines...basically wherever there is a break or an edge it can be used to interface that seam and create lovely results. I know this to be true with the sew in but I am not familiar with the fusible so I can't attest to that so much.

Sew In Hair Canvas
My first intro to Hair Canvas sort of sprung up from the Herringbone Jacket, I was doing a lot of research both on line and in books about tailoring and I kept running across reference to Hair Canvas. I read a lot of good things so I went down to my local independent sewing store and bought some to use in this jacket. I fell in love and have never looked back.

Jacket Back
In the Herringbone project I used it for the Front, Back, Hem and Sleeve Hems. Claire Shaeffer, in her book Couture Sewing Techniques Revised & Updated, puts forth techniques for interfacing most areas where there will be a facing or a hem, like the arm scythe, neckline, sleeve hem and hem and often she suggests using hair canvas as an ideal option for doing this. I have been getting in the habit of using this technique in at least one place on every project, though I don't always use hair canvas...I'd go broke.
Makes a nice softly rolled hem line, as shown on the Birds of a Feather Dress
The Hair Canvas is really proving to work just as well with lighter weight fabrics as it does with wools as you can see I used it to hem the Birds of a Feather Dress.   Depending on how you the interfaced are to moveant  or as required by the shape of the area to be interfaced the canvas can be cut on the bias, on grain or even crosswise. These will all result in a different roll or fold and can be used to prevent stretching or to assist in movement, as a mean to manipulate the fit and drape of the garment. For example, a jacket back is usually cut on the bias since this area is subject to the strain of our shoulders and backs moving and shifting while the front is not as much and can be cut on grain to help hold the shape better and to prevent distortion. I actually think there is more to this than my little musing but it is how I understand it.

I almost used it to interface my facings for the Summer Dress but it was going to require a lot for the back and being on a budget I decided against it (even though I had enough in my stash). A decision I am sort of regretting. I think it would have made for a much better over all effect.The Summer Dress pattern calls for small strap. I originally cut them out of the main fabric and used the same interfacing I used for the facing. I got them all sewn up on Tuesday night, upon turning them out to the outside I realized what a mess they were. All distorted and just Fugly in general, I ended up deciding to re cut them but out of the fabric I used for the bias tape and the Sash, it is more substantial and would be a nice contrast, adding visual interest.

Much Better
The results have been a thousand times better.....now all I have to do is attach them to the dress, interface the arm scythe (an idea compliments of Miss. Shaeffer), finish the hem, sew on the button hole and loop, finish the sash....actually there's more to do than I realized!

The moral of this ramble is really to just espouse the awesomeness and versatility of Hair Canvas and maybe encourage others to take the plunge and try it, even if only for a change of pace.

Happy Sewing,

Amelia

Thursday, November 3, 2011

The Herringbone Jacket....Finished.

So I actually finished this long ago but I have just failed to take photos until last night. I have worn it once and really enjoyed it.


Tuesday, September 6, 2011

The Herringbone Jacket....Update.

After much hand work....I am basically done with this project. Here is a quick recap of what I did since my last post.

In my last post I mentioned the canvas hair I used as structure for the front & back panels, as well as the tape I used for extra stability.
















After I inserted all the hair canvas and taped all the necessary areas that needed additional stability I constructed the lining out of black 100% Cotton Sateen. I made the lining exactly as I had made the wool outer shell. This required that I chop off parts of the lining to allow for the front & neck facings as well as the hem. attached the darts & side seams of the outer shell to the lining to anchor them together and to prevent the lining from shifting around to much. I lapped the lining edges over the facing edges and slip stitched it in place to finish. 












Once the lining had been inserted into the body I attached the sleeves. The tailoring books suggest affixing the sleeves after the lining has been attached to the body. This is apparently how mens suiting is done.

 

Pinned & Basted into place
  










I attached the sleeves and then I affixed a sleeve cap support strip. Before I did this the sleeve heads were looking sort of limp so this really helped the over look. 















Then I was able to insert the sleeve lining by slip stitching it into place. After both the sleeves were lined and hemmed I finished attaching the lower edge of the body lining and I was done!














The only thing left is to add the front closures. I am going to be using some large, black, sew on snap closures. 

I really enjoyed making this project. It did take a lot of time and there was a lot of hand work involved but I am happy with the results and I learned a lot and got to put a lot of techniques into practice. I truly enjoyed working with wool and hope to make something else out of wool some time really soon.





Tuesday, August 9, 2011

"The Herringbone Jacket" Simplicty #3298 ca. 1940s

First up for Fall/Winter 2011 is a lovely Jacket with asymmetrical closing & 3/4 length sleeves made out of 100% Wool "Herringbone."

I am using a Simplicity Pattern, bought on Etsy, that I graded up 2". This was awesome practice and it turned out great!




I am making View #2. I got the fabric to make it half price and I really love it, it is so easy to sew with. I think my new favorite fabric to work with is wool.....





I made the muslin and I was really happy with how the fitting turned out! I couldn't believe that my grading worked....I am so proud.





I have been focusing on really doing things thoroughly, instead of taking "shortcuts" that end in mediocre results. Therefore, I have been basting stuff together before permanently attaching the seams, highlighting the center lines with a hand done basting stitch to help with fitting, overcasting to finish seams and to prevent un-raveling....All these little things take a lot of extra time but I think they will pay off in better results.

At this point I am very close to finishing the outer shell.....I have finished the construction and the major "tailoring" details that I taught myself with this project. Again, very proud.

I used Hair Canvas for support and structure at the front and back as well as in the sleeve and body hems, I really like the result of this. I also "taped" along the neckline, front closing and armholes for extra stability. This detail has really created a crisp, solid look on the neckline and closing, like you see in men's suits. I have learned so much about what goes in to creating a tailored look and it has been really fun researching it and practicing. I can't wait to make more tailored clothing.




My resources have been The New Encyclopedia of Modern Sewing  (ca. 1940's), the standard Vogue sewing book and the awesome internet.

My next steps are finishing the interior seams to prevent the inside from raveling too much, constructing the lining and inserting it and then attaching the sleeves, which I will do after I insert the lining. I may not use buttons and instead use snaps on the inside for closure. I want to keep the finish as clean as possible.